feat(main): 添加OCPP配置的持久化支持和LED状态管理功能

hardware/firmware/src/main.cpp

@@ -1,5 +1,6 @@
 #include <Arduino.h>
 #include <WiFiManager.h>
+#include <Preferences.h>
 #include <string.h>
 
 #include <MicroOcpp.h>
@@ -18,7 +19,9 @@ enum LEDState
   LED_INITIALIZING,   // Blue blinking - Initialization and WiFi connecting
   LED_WIFI_CONNECTED, // Blue solid - WiFi connected, connecting to OCPP server
   LED_OCPP_CONNECTED, // Green solid - Successfully connected to OCPP server
-  LED_ERROR           // Red - Error state
+  LED_ERROR,          // Red solid - Error state
+  LED_RESET_TX,       // Yellow solid - 3s BOOT button hold (Ready to clear transaction)
+  LED_FACTORY_RESET   // Magenta fast blink - 7s BOOT button hold (Ready to factory reset)
 };
 
 static int s_retry_num = 0;
@@ -31,6 +34,19 @@ static const unsigned long BLINK_INTERVAL = 200; // 200ms blink interval
 uint8_t mac[6];
 char cpSerial[13];
 
+// OCPP Configuration Variables
+char ocpp_backend[128];
+char cp_identifier[64];
+char auth_key[64];
+bool shouldSaveConfig = false;
+
+// callback notifying us of the need to save config
+void saveConfigCallback()
+{
+  Serial.println("Should save config");
+  shouldSaveConfig = true;
+}
+
 struct mg_mgr mgr;
 
 /**
@@ -86,6 +102,38 @@ void updateLED()
     leds[0] = Rgb{255, 0, 0}; // Red solid
     leds.show();
     break;
+
+  case LED_RESET_TX:
+    // Yellow fast blink - Ready to clear transaction
+    if (current_time - s_blink_last_time >= 100)
+    {
+      s_blink_last_time = current_time;
+      s_blink_on = !s_blink_on;
+
+      if (s_blink_on)
+        leds[0] = Rgb{150, 150, 0}; // Yellow
+      else
+        leds[0] = Rgb{0, 0, 0};
+
+      leds.show();
+    }
+    break;
+
+  case LED_FACTORY_RESET:
+    // Magenta fast blink - Ready to factory reset
+    if (current_time - s_blink_last_time >= 100)
+    {
+      s_blink_last_time = current_time;
+      s_blink_on = !s_blink_on;
+
+      if (s_blink_on)
+        leds[0] = Rgb{255, 0, 255}; // Magenta
+      else
+        leds[0] = Rgb{0, 0, 0};
+
+      leds.show();
+    }
+    break;
   }
 }
 
@@ -113,7 +161,30 @@ void setup()
   leds[0] = Rgb{255, 255, 0};
   leds.show();
 
+  // Load configuration from Preferences
+  Preferences preferences;
+  preferences.begin("ocpp-config", false);
+  String b = preferences.getString("backend", CFG_OCPP_BACKEND);
+  String i = preferences.getString("identifier", CFG_CP_IDENTIFIER);
+  String a = preferences.getString("auth_key", "");
+
+  strncpy(ocpp_backend, b.c_str(), sizeof(ocpp_backend));
+  strncpy(cp_identifier, i.c_str(), sizeof(cp_identifier));
+  strncpy(auth_key, a.c_str(), sizeof(auth_key));
+
   WiFiManager wm;
+  wm.setSaveConfigCallback(saveConfigCallback);
+  wm.setSaveParamsCallback(saveConfigCallback);
+  wm.setParamsPage(true);
+
+  WiFiManagerParameter custom_ocpp_backend("backend", "OCPP Backend URL", ocpp_backend, 128);
+  WiFiManagerParameter custom_cp_identifier("identifier", "Charge Point ID", cp_identifier, 64);
+  WiFiManagerParameter custom_auth_key("auth_key", "Auth Key (leave blank if none)", auth_key, 64);
+
+  wm.addParameter(&custom_ocpp_backend);
+  wm.addParameter(&custom_cp_identifier);
+  wm.addParameter(&custom_auth_key);
+
   const char *customHeadElement = R"rawliteral(
     <style>
       :root {
@@ -256,6 +327,20 @@ void setup()
   )rawliteral";
   wm.setCustomHeadElement(customHeadElement);
   bool autoConnectRet = wm.autoConnect((String("HLCP_") + String(cpSerial).substring(String(cpSerial).length() - 6)).c_str(), cpSerial);
+
+  if (shouldSaveConfig)
+  {
+    strncpy(ocpp_backend, custom_ocpp_backend.getValue(), sizeof(ocpp_backend));
+    strncpy(cp_identifier, custom_cp_identifier.getValue(), sizeof(cp_identifier));
+    strncpy(auth_key, custom_auth_key.getValue(), sizeof(auth_key));
+
+    preferences.putString("backend", ocpp_backend);
+    preferences.putString("identifier", cp_identifier);
+    preferences.putString("auth_key", auth_key);
+    Serial.println("Saved new OCPP config to Preferences");
+  }
+  preferences.end();
+
   if (!autoConnectRet)
   {
     Serial.println("Failed to connect and hit timeout");
@@ -267,8 +352,20 @@ void setup()
     s_led_state = LED_WIFI_CONNECTED;
 
     mg_mgr_init(&mgr);
-    MicroOcpp::MOcppMongooseClient *client = new MicroOcpp::MOcppMongooseClient(&mgr, CFG_OCPP_BACKEND, CFG_CP_IDENTIFIER, CFG_AUTHORIZATIONKEY, "", MicroOcpp::makeDefaultFilesystemAdapter(MicroOcpp::FilesystemOpt::Use_Mount_FormatOnFail), MicroOcpp::ProtocolVersion(1, 6));
+    const char *final_auth_key = (strlen(auth_key) > 0) ? auth_key : nullptr;
+    MicroOcpp::MOcppMongooseClient *client = new MicroOcpp::MOcppMongooseClient(&mgr, ocpp_backend, cp_identifier, final_auth_key, "", MicroOcpp::makeDefaultFilesystemAdapter(MicroOcpp::FilesystemOpt::Use_Mount_FormatOnFail), MicroOcpp::ProtocolVersion(1, 6));
     mocpp_initialize(*client, ChargerCredentials(CFG_CP_MODAL, CFG_CP_VENDOR, CFG_CP_FW_VERSION, cpSerial, nullptr, nullptr, CFG_CB_SERIAL, nullptr, nullptr), MicroOcpp::makeDefaultFilesystemAdapter(MicroOcpp::FilesystemOpt::Use_Mount_FormatOnFail));
+
+    // For development/recovery: Set up BOOT button (GPIO 0)
+    pinMode(0, INPUT_PULLUP);
+
+    // Forcefully accept rejected RemoteStopTransaction (if hardware goes out of sync with CSMS)
+    setOnSendConf("RemoteStopTransaction", [](JsonObject payload)
+                  {
+        if (!strcmp(payload["status"], "Rejected")) {
+            Serial.println("[main] MicroOcpp rejected RemoteStopTransaction! Force overriding and stopping charging...");
+            endTransaction(nullptr, "Remote", 1); 
+        } });
   }
 }
 
@@ -277,6 +374,66 @@ void loop()
   mg_mgr_poll(&mgr, 10);
   mocpp_loop();
 
+  // Handle BOOT button (GPIO 0) interactions for recovery
+  bool is_btn_pressed = (digitalRead(0) == LOW);
+  static unsigned long boot_press_time = 0;
+  static bool boot_was_pressed = false;
+
+  if (is_btn_pressed)
+  {
+    if (!boot_was_pressed)
+    {
+      boot_was_pressed = true;
+      boot_press_time = millis();
+    }
+
+    unsigned long held_time = millis() - boot_press_time;
+    if (held_time >= 7000)
+    {
+      s_led_state = LED_FACTORY_RESET;
+    }
+    else if (held_time >= 3000)
+    {
+      s_led_state = LED_RESET_TX;
+    }
+  }
+  else
+  {
+    if (boot_was_pressed)
+    {
+      unsigned long held_time = millis() - boot_press_time;
+      if (held_time >= 7000)
+      {
+        Serial.println("BOOT button held for > 7s! Clearing WiFi and OCPP settings, then restarting...");
+
+        // Clear WiFi
+        WiFiManager wm;
+        wm.resetSettings();
+
+        // Clear Preferences
+        Preferences preferences;
+        preferences.begin("ocpp-config", false);
+        preferences.clear();
+        preferences.end();
+
+        // Give time for serial to print
+        delay(500);
+        ESP.restart();
+      }
+      else if (held_time >= 3000)
+      {
+        Serial.println("BOOT button held for > 3s! Forcefully ending dangling transaction...");
+        endTransaction(nullptr, "PowerLoss", 1);
+      }
+      boot_was_pressed = false;
+      // Temporarily set to init so the logic below restores the actual network state accurately
+      s_led_state = LED_INITIALIZING;
+    }
+  }
+
+  // Only update default LED states if button is not overriding them
+  if (!is_btn_pressed)
+  {
     auto ctx = getOcppContext();
     if (ctx && ctx->getConnection().isConnected())
     {
@@ -292,6 +449,7 @@ void loop()
         s_led_state = LED_WIFI_CONNECTED;
       }
     }
+  }
 
   updateLED();